Freedom from Problematic Water Quality
Monitoring water changes on time to avoid sick fish, unhealthy water plants, or green algae.
All-Rounder, Never Afraid of Comparison
The biggest advantage of monitors is not the accuracy, but the ability to observe fluctuations on a continuous basis.
Make Sure You Don't Miss Any Changes
To ensure the health of your tank, it is essential to be aware of changes in water quality at the earliest opportunity.
Anytime You Need It
Kactoily is the perfect solution for Aquariums, Fish ponds, Hydroponics, Drinking water, and Aquaculture.
Always Keep an Eye on Your Water Quality
Easily monitor the status of your tank by glancing at the screen which displays all measurements simultaneously.
Make Distance NO Longer An Issue
The communication distance between the probe and the display can reach 30 meters / 100 ft when there is no barrier.
*Blocking / passing through a wall will impact the connection distance.
Different Fixation Methods
Manual Calibration & Adjustment
Guarantee the accuracy of measurement.
*Regular cleaning of the probes between 3-6 months extends the life of the probes and allows for continued accuracy.
FAQs
What if the probe is broken?
First of all, we offer a 12-month warranty for the probe and an 18-month warranty for the display..
With a split sensor and display design, if the probe breaks, you can replace it instead of replacing the whole monitor.
How deep do I need to place the probe underwater?
The depth of the probe into the water needs to be placed between the highest and lowest water levels.
Do I need to calibrate it again when I receive the monitor?
We recommend you calibrate the monitor before use.
Please refer to the manual for specific calibration steps. After that, it is recommended to calibrate it every six months, because any tester will produce errors during long-term use.
How should I proceed if the measurements do not change with different pH buffer solutions when calibrating?
Please click “Reset” to restore factory settings and re-calibrate.
What does it mean if it shows "!" on the monitor?
It means that the display and probe have been disconnected.
In this case, the display cannot receive data from the probe due to the distance. Please shorten the distance between the display and the probe.
Does the wireless monitor emit current into the water when collecting, processing, and sending data? Will it affect the fish?
Not at all!
We use high-frequency forward and reverse pulses that don't send an electric current into the water.